Precautions for safe operation of forklift

1. The rack is the main part to prevent the goods loaded on the fork from sliding to the operator. In case of loose installation, reuse after disassembly and reuse after reconstruction, it is very dangerous and may lead to major accidents.

2 the roof protection frame is the main part to prevent the upper objects from falling and protect the operator. If the installation is loose, it will be very dangerous to use it after removal, and use it after transformation, which may lead to major accidents.

3 the tire inflation pressure shall be inflated according to the pressure value specified on the "tire pressure" label.

4 when the engine is very hot, the water tank cover cannot be opened easily.

5. During the use of the chain, it shall be regularly inspected to ensure that there are good lubrication conditions between the chain links and that the left and right chains have the same tightness; If the chain is worn during use, and the change value of chain pitch exceeds 2% of the standard value, the chain must be replaced to ensure the bearing safety.

6 after working for one day, the fuel tank shall be filled with oil, so as to prevent the moisture in the fuel tank from condensing into water droplets and mixing into the oil at night.

7 when leaving the vehicle, the hand brake must be in the braking state, the forks shall be lowered to the ground, the shift handle shall be placed in the neutral position, the engine shall be stopped or the power supply shall be disconnected. When parking on a small ramp, pull the parking brake device well. When the parking time is long, the wheels must be cushioned with wedges. It is forbidden to park the forklift on a large slope.

8 without the written approval of the company, it is not allowed to modify the forklift or add any working device, otherwise the rated load may be affected.

9 when refueling, the driver shall not be on the vehicle and stop the engine; Do not ignite when checking the tank level.

10 before the forklift leaves the factory, the pressure of the multi-way valve and the safety valve has been adjusted. The user should not adjust it at will during use, so as not to damage the entire hydraulic system and hydraulic components due to excessive pressure adjustment.