Precautions for safe operation of forklift (4)

1. When loading and unloading goods, the control lever should be operated slowly.

2. In the process of lifting and lowering, do not lower or stop the work suddenly, otherwise, there may be a risk of cargo deviation and overturning.

3. When lifting goods, it is prohibited to tilt the fork forward. When driving, the gantry must be tilted back as far as possible to keep the goods stable. When lifting, the gantry must be vertical.

Be careful when driving into the truck.

5. Please do not jump up and down on the Hangzhou forklift. When getting on and off the forklift, hold hands and step on the pedal. Do not grasp the steering wheel or operating lever.

6. Do not load or unload goods that exceed the height of the rear support.

7. When the chain is loose, do not pull the fork out of the tray. When the chain is loose, lift the fork slightly to adjust the chain slack.

8. In addition to normal operation, the forklift is strictly prohibited from other uses. The wrong use of the forklift may cause accidental damage to the forklift.

9. It is not allowed to drag any object with the trailer. When the forklift cannot run normally, it can be dragged to a safe low point with the trailer.

10. Prevent the forklift from losing its center of gravity, and adjust the width of the forklift according to the size of the pallet.

11. When the forklift is running, no one is allowed to load or unload goods or tidy up the goods of the forklift. Failure to comply may lead to accidents.

12. Damaged trays shall not be used. The trays must be confirmed to be firm and reliable before use.

13. When parking the forklift, the gantry shall tilt forward, lower the goods to the road surface, pull the parking brake, turn off the key switch and remove the key before leaving the forklift.