Forklift safety driving rules

Why is there such a safe driving code for forklift? It is an operation process formulated to ensure that forklift drivers can operate Hangzhou forklift safely, accurately and effectively

It specifies the operation specifications of the forklift driver in every link during starting, driving and loading and unloading.

1 it is strictly prohibited to drive with people, and it is not allowed to drive the forklift after drinking, and it is not allowed to make phone calls during driving.

2. Carefully study and strictly observe the operating procedures, be familiar with the vehicle performance and the road conditions in the operating area, be familiar with the basic knowledge and skills of forklift maintenance, and carefully follow the

It is required to maintain the tea cool.

2 the forklift can only be driven after passing the examination of relevant departments and obtaining the certificate issued by government agencies, and the following operating procedures shall be strictly observed.

What should I pay attention to when parking

1 when the temperature is below minus 15 degrees, the battery should be removed and then helped indoors to avoid freezing.

2 clean the forklift and park it at the designated place after daily maintenance.

3. Stop the engine after two to three minutes. After the engine is stopped, brake the handle immediately.

4 before the engine is stopped, the engine should be idled.

5 if the temperature is very low, the cooling water should be drained.

Start Hangzhou forklift quotation

Start slowly when you start.

When the forklift is carrying goods, the driver must first confirm that the goods carried are stable.

Hydraulic braking vehicles must be safe before starting.

When starting, you should first observe the surrounding environment, confirm that there is no problem, then whistle and start.

Loading and unloading

1. It is not allowed to pick up goods with forks and unload goods by turning over

2. Drive slowly, and pay attention not to roll objects on wheels

3. During the loading and unloading of goods, the forklift must be braked by the brake.

4. It is not allowed to work with a single fork, and it is not allowed to use the fork to top or pull the goods.

5. When loading goods, the distance between the forks should be adjusted.

6. It is prohibited to overload objects, fork people with goods, or work at height.

7. When the forklift is working, it is prohibited to stand under the forklift.

8. It is prohibited to fork goods at high speed.

Leave the forklift

1. When there are goods on the forklift, the driver cannot leave the forklift. If he wants to leave the forklift, he must unload the goods.

2. Press the hand brake switch

3. The engine shuts down and power is cut off.

4. Remove the key.