Safe operation of forklift

1. If the forklift is found to have problems, it shall be timely reported for maintenance. It is not allowed to work with the problem or not to report without knowing.

2 during the lifting, lowering or driving of the forklift, no personnel shall stand on the forklift to hold the goods.

3 the speed of the forklift in the plant area shall not exceed 5km / h, and the speed requirement is lower when entering the workshop.

4 the forklift cannot turn on the broken road or cross the slope.

5 the goods loaded on the forklift shall not block the driver's sight, otherwise it is easy to cause accidents.

6 when the forklift is running, the gantry should be tilted back.

7 when the forklift operates in the factory, it must abide by the rules of the site and traffic, and keep a distance from the surrounding vehicles.

8 it is forbidden to turn off the forklift when it is going downhill.

9 when turning, if there are people and vehicles nearby, the horn should be sounded to give a driving signal

10 when driving, the height between the bottom of the fork and the ground shall be kept at 300mm, and the gantry shall be tilted back.

11 when the forklift is running, the shelf should be raised too high, which will affect the stability of the forklift.