How to disassemble clean the forklift engine

If the engine of Hangzhou forklift truck is to be disassembled and cleaned, the engine shall be disassembled, and then the engine shall be cooled. Otherwise, unnecessary troubles will be caused

1. The water is discharged from the engine cooling system, and the engine oil and hydraulic oil are discharged from the engine and hydraulic transmission.

2. Remove the safety shed and seat, remove the radiator cover, and remove the exhaust pipe muffler.

3. Remove the foot pedal and remove the radiator, exhaust pipe and its accessories.

4. Remove the connectors (hoses, pipes, etc.) between the engine and the hydraulic transmission and other systems.

5. Disassemble the connection between the engine and the main drive (universal joint, etc.).

6. Hang the engine on the lifting equipment and unscrew the screw plug bolts connected with the frame.

7. Lift the engine with lifting equipment and place the engine on the bench.

Although the disassembly and cleaning seems simple, it is necessary to be careful in the process of disassembly and cleaning. If you do not pay attention to any small step in the process, it may cause the engine to fail to operate normally. Therefore, it is necessary to find an experienced person to operate the engine.